Aeronautics and Aerospace Research Centre (A²RC)
  1. Advanced Composites Research Focused Group
  2. Flow Control and Turbulence Group
  1. Publications
Aeronautics and Aerospace Research Centre (A²RC)

Publications

Publications

Patsialis, D., Taflanidis, A. and Giaralis, A. ORCID: 0000-0002-2952-1171 (2021). Tuned-mass-damper-inerter optimal design and performance assessment for multi-storey hysteretic buildings under seismic excitation. Bulletin of Earthquake Engineering, doi: 10.1007/s10518-021-01236-4

Wang, Z. and Giaralis, A. ORCID: 0000-0002-2952-1171 (2021). Enhanced motion control performance of the tuned mass damper inerter (TMDI) through primary structure shaping. Structural Control and Health Monitoring, 28(8), e2756. doi: 10.1002/stc.2756

Veerasamy, D., Atkin, C.J. and Ponnusami, S. A. ORCID: 0000-0002-2143-8971 (2021). Aerofoil wake-induced transition characteristics on a flat-plate boundary layer. Journal of Fluid Mechanics, 920, A29. doi: 10.1017/jfm.2021.452

Azizi, M., Talatahari, S. and Giaralis, A. ORCID: 0000-0002-2952-1171 (2021). Optimization of Engineering Design Problems Using Atomic Orbital Search Algorithm. IEEE Access, 9, pp. 102497-102519. doi: 10.1109/ACCESS.2021.3096726

Krishnasamy, J., Ponnusami, S. A. ORCID: 0000-0002-2143-8971, Turteltaub, S. and van der Zwaag, S. (2021). Thermal cyclic behavior and lifetime prediction of self-healing thermal barrier coatings. International Journal of Solids and Structures, 222-23, 111034. doi: 10.1016/j.ijsolstr.2021.03.021

Mahmoud, M., Ramadan, M., Naher, S., Pullen, K. R., Ali Abdelkareem, M. and Olabi, A-G. (2021). A review of geothermal energy-driven hydrogen production systems. Thermal Science and Engineering Progress, 22, 100854. doi: 10.1016/j.tsep.2021.100854

Mahmoud, M., Ramadan, M., Pullen, K. R., Abdelkareem, M. A., Wilberforce, T., Olabi, A-G. and Naher, S. (2021). A review of grout materials in geothermal energy applications. International Journal of Thermofluids, 10, 100070. doi: 10.1016/j.ijft.2021.100070

Freddi, F., Galasso, C., Cremen, G., Dall’Asta, A., Di Sarno, L., Giaralis, A. ORCID: 0000-0002-2952-1171, Gutiérrez-Urzúa, F., Malaga-Chuquitaype, C., Mitoulis, S. A., Petrone, C., Sextos, A., Sousa, L., Tarbali, K., Tubaldi, E., Wardman, J. and Woo, G. (2021). INNOVATIONS in earthquake risk reduction for resilience: RECENT advances and challenges. International Journal of Disaster Risk Reduction, doi: 10.1016/j.ijdrr.2021.102267

Wang, Z. and Giaralis, A. ORCID: 0000-0002-2952-1171 (2021). Top-Story Softening for Enhanced Mitigation of Vortex Shedding-Induced Vibrations in Wind-Excited Tuned Mass Damper Inerter-Equipped Tall Buildings. Journal of Structural Engineering, 147(1), 04020283. doi: 10.1061/(asce)st.1943-541x.0002838

Arafat, M., Dinan, B., Haseeb, A., Akbar, S., Rahman, B. M., Rozali, S. and Naher, S. (2021). Growth of 1D TiO2nanostructures on Ti substrates incorporated with residual stress through humid oxidation and their characterizations. Nanotechnology, 32(47), 475607. doi: 10.1088/1361-6528/ac1d77

Giaralis, A. ORCID: 0000-0002-2952-1171 (2021). An inerter-based dynamic vibration absorber with concurrently enhanced energy harvesting and motion control performances under broadband stochastic excitation via inertance amplification. Journal of Risk and Uncertainty in Engineering Systems Part B: Mechanical Engineering, 7(1), 010909.. doi: 10.1115/1.4049213

Mahmoud, M., Ramadan, M., Naher, S. ORCID: 0000-0003-2047-5807, Pullen, K. and Olabi, A-G. (2021). CO2 – based transcritical Rankine cycle coupled with a ground-cooled condenser. Thermal Science and Engineering Progress, 25, 100948. doi: 10.1016/j.tsep.2021.100948

Pietrosanti, D., De Angelis, M. and Giaralis, A. ORCID: 0000-0002-2952-1171 (2021). Experimental seismic performance assessment and numerical modelling of nonlinear inerter vibration absorber (IVA)-equipped base isolated structures tested on shaking table. Earthquake Engineering and Structural Dynamics, 50(10), pp. 2732-2753. doi: 10.1002/eqe.3469

Pietrosanti, D., De Angelis, M. and Giaralis, A. ORCID: 0000-0002-2952-1171 (2020). Experimental study and numerical modeling of nonlinear dynamic response of SDOF system equipped with tuned mass damper inerter (TMDI) tested on shaking table under harmonic excitation. International Journal of Mechanical Sciences, 184, 105762. doi: 10.1016/j.ijmecsci.2020.105762

Wang, Z. and Giaralis, A. ORCID: 0000-0002-2952-1171 (2020). Enhanced serviceability performance in wind-excited tall buildings equipped with optimal tuned mass damper inerter via top-storey softening. In: EURODYN 2020 Proceedings of the XI International Conference on Structural Dynamics. (pp. 2103-2112). Greece, Athens: Institute of Research and Development for Computational Methods in Engineering Sciences. ISBN 978-618-85072-2-7

Mahmoud, M., Ramadan, M., Naher, S. ORCID: 0000-0003-2047-5807, Pullen, K. R. ORCID: 0000-0001-8501-9226 and Olabi, A-G. (2020). The impacts of different heating systems on the environment: A review. Science of The Total Environment, doi: 10.1016/j.scitotenv.2020.142625

Narayana, K. J., Burela, R. G., Ponnusami, S. A. ORCID: 0000-0002-2143-8971 and Harursampath, D. (2020). Geometric nonlinear analysis of composite stiffened panels using variational asymptotic method. AIAA Journal, 58(9), doi: 10.2514/1.J058963

Mahmoud, M., Ramadan, M., Naher, S. ORCID: 0000-0003-2047-5807, Pullen, K. R. ORCID: 0000-0001-8501-9226, Baroutaji, A. and Olabi, A-G. (2020). Recent advances in district energy systems: A review. Thermal Science and Engineering Progress, doi: 10.1016/j.tsep.2020.100678

Qaban, A. ORCID: 0000-0003-2982-8429, Mohmed, T., Quazi, M. M. and Naher, S. ORCID: 0000-0003-2047-5807 (2020). The effect of Al and Nb contents, cooling rate and rolling condition on the microstructure and corrosion behaviour of HSLA steel. Materials Today Communications, 101362.. doi: 10.1016/j.mtcomm.2020.101362

Mahmoud, M., Ramadan, M., Olabi, A-G., Pullen, K. R. ORCID: 0000-0001-8501-9226 and Naher, S. ORCID: 0000-0003-2047-5807 (2020). A review of mechanical energy storage systems combined with wind and solar applications. Energy Conversion and Management, 210, p. 112670. doi: 10.1016/j.enconman.2020.112670

Gkoktsi, K. and Giaralis, A. ORCID: 0000-0002-2952-1171 (2020). A compressive MUSIC spectral approach for identification of closely-spaced structural natural frequencies and post-earthquake damage detection. Probabilistic Engineering Mechanics, 103030.. doi: 10.1016/j.probengmech.2020.103030

Pietrosanti, D., De Angelis, M. and Giaralis, A. ORCID: 0000-0002-2952-1171 (2020). Shake table testing of a tuned mass damper inerter (Tmdi)-equipped structure and nonlinear dynamic modeling under harmonic excitations. In: Proceedings of XXIV AIMETA Conference 2019. (pp. 1512-1521). Cham, Switzerland: Springer. ISBN 9783030410568

Barrie, M., Qaban, A. ORCID: 0000-0003-2982-8429 and Naher, S. ORCID: 0000-0003-2047-5807 (2020). The influence of Widmanstätten ferrite, martensite and grain boundary carbides on the strength and impact behaviour of high Al (0.2%) and Nb containing hot rolled steels. Materials and design, 109, 108601.. doi: 10.1016/j.matdes.2020.108601

Cacciola, P., Tombari, A. and Giaralis, A. ORCID: 0000-0002-2952-1171 (2020). An inerter-equipped vibrating barrier for non-invasive motion control of seismically excited structures. Structural Control and Health Monitoring, 27(3), e2474. doi: 10.1002/stc.2474

Giaralis, A., Kougioumtzoglou, I. A. and Spanos, P. D. (2020). Special Issue On Response Analysis and Optimization of Dynamic Energy Harvesting Systems Under the Presence of Uncertainties. ASME J. Risk Uncertainty Part B, RISK-20. doi: 10.1115/1.4049201

Petrini, F., Giaralis, A. ORCID: 0000-0002-2952-1171 and Wang, Z. (2020). Optimal tuned mass-damper-inerter (TMDI) design in wind-excited tall buildings for occupants’ comfort serviceability performance and energy harvesting. Engineering Structures, 204, 109904.. doi: 10.1016/j.engstruct.2019.109904

Wang, Z. and Giaralis, A. ORCID: 0000-0002-2952-1171 (2020). MOTION CONTROL PERFORMANCE OF TUNED MASS DAMPER INERTER (TMDI) IN CONTINUOUS WHITE-NOISE EXCITED CANTILEVERED BEAMS WITH VARIOUS SHAPES. EURODYN 2020: XI International Conference on Structural Dynamics, 1, pp. 1576-1585. doi: 10.47964/1120.9128.20319

Mintz, B., Qaban, A. ORCID: 0000-0003-2982-8429, Bendke, P. and Naher, S. ORCID: 0000-0003-2047-5807 (2019). The influence of a high aluminium addition on the strength and impact behaviour of hot-rolled Nb containing steels. Materials Science and Technology, doi: 10.1080/02670836.2019.1701272

Krishnasamy, J., Ponnusami, S. A. ORCID: 0000-0002-2143-8971, Turteltaub, S. and van der Zwaag, S. (2019). Numerical Investigation into the Effect of Splats and Pores on the Thermal Fracture of Air Plasma-Sprayed Thermal Barrier Coatings. Journal of Thermal Spray Technology, doi: 10.1007/s11666-019-00949-y

Tamanna, N., Crouch, R.S. and Naher, S. ORCID: 0000-0003-2047-5807 (2019). Progress in Numerical Simulation of the Laser Cladding Process. Optics and Lasers in Engineering, 122, pp. 151-163. doi: 10.1016/j.optlaseng.2019.05.026

Cui, H., Mahadik, Y., Hallett, S. R., Partridge, I. K., Allegri, G., Ponnusami, S. A. and Petrinic, N. (2019). Coupon scale Z-pinned IM7/8552 delamination tests under dynamic loading. Composites Part A: Applied Science and Manufacturing, 125, 105565.. doi: 10.1016/j.compositesa.2019.105565

De Angelis, M., Giaralis, A. ORCID: 0000-0002-2952-1171, Petrini, F. and Pietrosanti, D. (2019). Optimal tuning and assessment of inertial dampers with grounded inerter for vibration control of seismically excited base-isolated systems. Engineering Structures, 196, 109250.. doi: 10.1016/j.engstruct.2019.05.091

Pathan, M. V., Ponnusami, S. A. ORCID: 0000-0002-2143-8971, Pathan, J., Pitisongsawat, R., Erice, B., Petrinic, N. and Tagarielli, V. L. (2019). Predictions of the mechanical properties of unidirectional fibre composites by supervised machine learning. Scientific Reports, 9(1), 13964.. doi: 10.1038/s41598-019-50144-w

Sedhain, S. and Giaralis, A. ORCID: 0000-0002-2952-1171 (2019). Enhanced optimal tuned mass-damper-inerter performance for seismic protection of multi-storey buildings via top-storey softening. Paper presented at the SECED 2019 Conference, 9-10 September 2019, Greenwich, London.

Skrekas, P., Giaralis, A. ORCID: 0000-0002-2952-1171 and Sextos, A. (2019). Probabilistic seismic risk assessment of adjacent colliding r/c inelastic structures accounting for record-to-record variability. Paper presented at the 4th Hellenic Conference of Earthquake Engineering and Engineering Seismology, 5-7 Sep 2019, Athens, Greece.

Wang, Z. and Giaralis, A. ORCID: 0000-0002-2952-1171 (2019). Vibration suppression and energy harvesting potential in wind excited buildings equipped with ground floor tuned inerter damper. Paper presented at the 9th Conference on Smart Structures and Materials, SMART 2019, 8-11 Jul 2019, Paris, France.

Giaralis, A. ORCID: 0000-0002-2952-1171, Pachakis, D. and Savvidis, R. (2019). Optimal seismic upgrade timing of seaports in high-capital cost and high-throughput growth environments using a real options approach. Paper presented at the 2nd International Conference on Natural Hazards & Infrastructure- ICONHIC 2019, 23 - 26 June 2019, Chania, Greece.

Giaralis, A. ORCID: 0000-0002-2952-1171, Taflanidis, A. and Patsialis, D. (2019). Multi-objective optimal design of inerter-based dampers for earthquake protection of buildings trading seismic performance to inerter force. Paper presented at the 2nd International Conference on Natural Hazards & Infrastructure- ICONHIC 2019, 23 - 26 June 2019, Chania, Greece.

Taflanidis, A., Giaralis, A. ORCID: 0000-0002-2952-1171 and Patsialis, D. (2019). Multi-objective optimal design of inerter-based vibration absorbers for earthquake protection of multi-storey building structures. Journal of The Franklin Institute, doi: 10.1016/j.jfranklin.2019.02.022

Gkoktsi, K. and Giaralis, A. ORCID: 0000-0002-2952-1171 (2019). A multi-sensor sub-Nyquist power spectrum blind sampling approach for low-power wireless sensors in operational modal analysis applications. Mechanical Systems and Signal Processing, 116, pp. 879-899. doi: 10.1016/j.ymssp.2018.06.049

Ponnusami, S. A. ORCID: 0000-0002-2143-8971, Krishnasamy, J., Turteltaub, S. and van der Zwaag, S. (2019). A micromechanical fracture analysis to investigate the effect of healing particles on the overall mechanical response of a self-healing particulate composite. Fatigue and Fracture of Engineering Materials and Structures, 42(2), pp. 533-545. doi: 10.1111/ffe.12929

Krishnasamy, J., Ponnusami, S. A. ORCID: 0000-0002-2143-8971, Turteltaub, S. and van der Zwaag, S. (2019). Computational investigation of porosity effects on fracture behavior of thermal barrier coatings. Ceramics International, 45(16), pp. 20518-20527. doi: 10.1016/j.ceramint.2019.07.031

Sirikham, A., Zhao, Y., Nezhad, H. Y., Du, W. and Roy, R. ORCID: 0000-0001-5491-7437 (2019). Estimation of Damage Thickness in Fiber-Reinforced Composites using Pulsed Thermography. IEEE Transactions on Industrial Informatics, 15(1), pp. 445-453. doi: 10.1109/TII.2018.2878758

Liu, J., Silveira, J., Groarke, R., Parab, S., Singh, H., McCarthy, E., Karazi, S., Mussatto, A., Houghtaling, J., Ahad, I. U., Naher, S. ORCID: 0000-0003-2047-5807 and Brabazon, D. (2019). Effect of powder metallurgy synthesis parameters for pure aluminium on resultant mechanical properties. International Journal of Material Forming, 12(1), pp. 79-87. doi: 10.1007/s12289-018-1408-5

Dasari, B. L., Brabazon, D. and Naher, S. ORCID: 0000-0003-2047-5807 (2019). Prediction of Mechanical Properties of Graphene Oxide Reinforced Aluminum Composites. Metals, 9(10), p. 1077. doi: 10.3390/met9101077

Gkoktsi, K., Giaralis, A. ORCID: 0000-0002-2952-1171, Klis, R. P., Dertimanis, V. and Chatzi, E. N. (2019). Output-Only Vibration-Based Monitoring of Civil Infrastructure via Sub-Nyquist/Compressive Measurements Supporting Reduced Wireless Data Transmission. Frontiers in Built Environment, 5, 111.. doi: 10.3389/fbuil.2019.00111

Ponnusami, S. A. ORCID: 0000-0002-2143-8971, Gupta, M. and Harursampath, D. (2019). Asymptotic Modeling of Nonlinear Bending and Buckling Behavior of Carbon Nanotubes. AIAA Journal, 57(10), pp. 4132-4140. doi: 10.2514/1.j057564

Qaban, A. ORCID: 0000-0003-2982-8429 and Naher, S. ORCID: 0000-0003-2047-5807 (2019). Evaluation of Toughness of High Strength Low Alloy (HSLA) Steels as a Function of Carbon Content. International Journal of Mechanical and Production Engineering (IJMPE), 7(5), pp. 53-56.

Qaban, A. ORCID: 0000-0003-2982-8429 and Naher, S. ORCID: 0000-0003-2047-5807 (2019). Investigation of corrosion resistance of high-strength low-alloy (HSLA) steel in fresh and salt water for pipeline application. AIP Conference Proceedings, 2146, 020021.. doi: 10.1063/1.5123708

Savvidis, R., Pachakis, D. and Giaralis, A. ORCID: 0000-0002-2952-1171 (2018). Optimal seismic upgrade timing in seaports with increasing throughput demand via real options. ASCE-ASME Journal of Risk and Uncertainty in Engineering systems, Part A: Civil Engineering, 5(1), doi: 10.1061/AJRUA6.0001003

Krishnasamy, J., Ponnusami, S. A., Turteltaub, S. and van der Zwaag, S. (2018). Modelling the fracture behaviour of thermal barrier coatings containing healing particles. Materials & Design, 157, pp. 75-86. doi: 10.1016/j.matdes.2018.07.026

Ruiz, R., Taflanidis, A. A., Giaralis, A. ORCID: 0000-0002-2952-1171 and Lopez-Garcia, D. (2018). Risk-informed optimization of the tuned mass-damper-inerter (TMDI) for the seismic protection of multi-storey building structures. Engineering Structures, 177, pp. 836-850. doi: 10.1016/j.engstruct.2018.08.074

Pathan, M. V., Erice, B., Ponnusami, S. A. and Petrinic, N. (2018). Experimental characterisation of rate-dependent compression behaviour of fibre reinforced composites. EPJ Web of Conferences, 183, 02053.. doi: 10.1051/epjconf/201818302053

Dasari, B. L., Morshed, M.M., Nouri, J. M. ORCID: 0000-0001-8610-3737, Brabazon, D. and Naher, S. (2018). Mechanical properties of graphene oxide reinforced aluminium matrix composites. Composites Part B: Engineering, 145, pp. 136-144. doi: 10.1016/j.compositesb.2018.03.022

Decarli, B. and Giaralis, A. ORCID: 0000-0002-2952-1171 (2018). Modal strain-based post-earthquake damage characterization of r/c frame buildings. Paper presented at the 16th European Conference on Earthquake Engineering- 16ECEE, 18 - 21 June 2018, Thessaloniki, Greece.

Ruiz, R., Taflanidis, A., Giaralis, A. ORCID: 0000-0002-2952-1171 and Lopez-Garcia, D. (2018). Multi-criteria optimization of seismic protective devices utilizing lifecycle performance objectives and application to the design of the tuned mass damper inerter (TMDI) for buildings in Chile. Paper presented at the 16th European Conference on Earthquake Engineering- 16ECEE, 18 - 21 June 2018, Thessaloniki, Greece.

Taflanidis, A. and Giaralis, A. ORCID: 0000-0002-2952-1171 (2018). Multi-objective optimal design of the tuned mass-damper-inerter (TMDI) for stochastically support excited building structures. Paper presented at the 16th European Conference on Earthquake Engineering- 16ECEE, 18 - 21 June 2018, Thessaloniki, Greece.

Gkoktsi, K. and Giaralis, A. ORCID: 0000-0002-2952-1171 (2018). A sub-Nyquist co-prime sampling music spectral approach for natural frequency identification of white-noise excited structures. In: Proceedings of the 8th International Conference on Computational Stochastic Mechanics (CSM 8). (pp. 246-255). France: Research Publishing. ISBN 978-981-11-2723-6

Mitseas, I., Kougioumtzoglou, I., Giaralis, A. and Beer, M. (2018). A novel stochastic linearization framework for seismic demand estimation of hysteretic MDOF systems subject to linear response spectra. Structural Safety, 72, pp. 84-98. doi: 10.1016/j.strusafe.2017.12.008

Qaban, A. and Naher, S. ORCID: 0000-0003-2047-5807 (2018). Influence of Al content on the corrosion resistance of micro-alloyed hot rolled steel as a function of grain size. AIP Conference Proceedings, 1960, 040017.. doi: 10.1063/1.5034871

Ponnusami, S. A. ORCID: 0000-0002-2143-8971, Krishnasamy, J., Turteltaub, S. and van der Zwaag, S. (2018). A cohesive-zone crack healing model for self-healing materials. International Journal of Solids and Structures, 134, pp. 249-263. doi: 10.1016/j.ijsolstr.2017.11.004

Kabir, I. R., Yin, D., Tamanna, N. and Naher, S. ORCID: 0000-0003-2047-5807 (2018). Thermomechanical modelling of laser surface glazing for H13 tool steel. Applied Physics A: Materials Science & Processing, 124(3), doi: 10.1007/s00339-018-1671-9

Tamanna, N., Crouch, R.S., Kabir, I. R. and Naher, S. (2018). An Analytical Model to Predict and Minimize the Residual Stress of Laser Cladding Process. Applied Physics A: Materials Science & Processing, doi: 10.1007/s00339-018-1585-6

Giaralis, A. and Taflanidis, A. A. (2018). Optimal tuned mass-damper-inerter (TMDI) design for seismically excited MDOF structures with model uncertainties based on reliability criteria. Structural Control & Health Monitoring, 25(2), doi: 10.1002/stc.2082

Giaralis, A. ORCID: 0000-0002-2952-1171 and Petrini, F. (2018). Erratum for “Wind-Induced Vibration Mitigation in Tall Buildings Using the Tuned Mass-Damper-Inerter” by Agathoklis Giaralis and Francesco Petrini. Journal of Structural Engineering, 144(2), 08217004 .. doi: 10.1061/(asce)st.1943-541x.0001980

Chitsanga, N., Giaralis, A. ORCID: 0000-0002-2952-1171 and Kaitwanidvilai, S. (2018). Robust cascade H infinity control of BLDC motor systems using fixed-structure two degrees of freedom controllers designed via genetic algorithm. Paper presented at the International MultiConference of Engineers and Computer Scientists 2018, 14-16 Mar 2018, Kowloon, Hong Kong.

Erice, B., Thomson, D., Ponnusami, S. A., Pathan, M. V. and Petrinic, N. (2018). On the Rate-dependent Plasticity Modelling of Unidirectional Fibre-reinforced Polymeric Matrix Composites. EPJ Web of Conferences, 183, 01055.. doi: 10.1051/epjconf/201818301055

Ponnusami, S. A. ORCID: 0000-0002-2143-8971, Cui, H., Erice, B., Pathan, M. V. and Petrinic, N. (2018). A Wedge-DCB Test Methodology to Characterise High Rate Mode-I Interlaminar Fracture Properties of Fibre Composites. EPJ Web of Conferences, 183, 02052.. doi: 10.1051/epjconf/201818302052

Dasari, B. L., Nouri, J. M., Brabazon, D. and Naher, S. (2017). Graphene and derivatives – Synthesis techniques, properties and their energy applications. Energy, 140(1), pp. 766-778. doi: 10.1016/j.energy.2017.08.048

Kabir, I. R., Yin, D. and Naher, S. ORCID: 0000-0003-2047-5807 (2017). 3D Thermal Model of Laser Surface Glazing for H13 Tool Steel. AIP Conference Proceedings, 1896, 130003.. doi: 10.1063/1.5008152

Qaban, A., Mintz, B. and Naher, S. (2017). Hot rolled high Al containing steels as a replacement for the control rolled high strength low alloy (HSLA) steels. AIP Conference Proceedings, 1896(1), 010001.. doi: 10.1063/1.5008156

Tamanna, N., Crouch, R.S. and Naher, S. ORCID: 0000-0003-2047-5807 (2017). A One-dimensional Analysis of the Distribution of Temperature, Stress and Strain in the co-axial Laser Cladding Process. AIP Conference Proceedings, 1896, 040015.. doi: 10.1063/1.5008041

Dasari, B. L., Nouri, J. M., Brabazon, D. and Naher, S. (2017). Parametric study for graphene reinforced aluminum matrix composites production using Box Behnken design. AIP Conference Proceedings, 1896(1), 130006.. doi: 10.1063/1.5008155

Kabir, I. R., Yin, D., Tamanna, N. and Naher, S. ORCID: 0000-0003-2047-5807 (2017). 3D Thermal Model of Laser Surface Glazing for Ti6Al4V alloy. Applied Sciences,

Qaban, A., Mintz, B., Kang, S. E. and Naher, S. (2017). Hot ductility of high Al TWIP steels containing Nb and Nb-V. Materials Science and Technology, 33(14), pp. 1645-1656. doi: 10.1080/02670836.2017.1309097

Gkoktsi, K., Giaralis, A. ORCID: 0000-0002-2952-1171, Klis, R., Dertimanis, V. and Chatzi, E. (2017). Vibration-based structural performance assessment via output-only sub-Nyquist/compressive wireless sensor data. Paper presented at the 4th Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures- SMAR 2017, 13 - 15 September 2017, Zurich, Switzerland.

Giaralis, A. and Petrini, F. (2017). Wind-induced vibration mitigation in tall buildings using the tuned mass-damper-inerter (TMDI). Journal of Structural Engineering, 143(9), 04017127. doi: 10.1061/(ASCE)ST.1943-541X.0001863

Gkoktsi, K. and Giaralis, A. (2017). Assessment of sub-Nyquist deterministic and random data sampling techniques for operational modal analysis. Structural Health Monitoring, 16(5), pp. 630-646. doi: 10.1177/1475921717725029

Mitseas, I., Kougioumtzoglou, I., Giaralis, A. and Beer, M. (2017). A Stochastic Dynamics Approach for Seismic Response Spectrum-Based Analysis of Hysteretic MDOF Structures. Paper presented at the 12th International Conference on Structural Safety & Reliability, 6-10 Aug 2017, Vienna, Austria.

Nezhad, H. Y., Zhao, Y., Liddel, P. D., Marchante, V. and Roy, R. ORCID: 0000-0001-5491-7437 (2017). A novel process-linked assembly failure model for adhesively bonded composite structures. CIRP Annals, 66(1), pp. 29-32. doi: 10.1016/j.cirp.2017.04.103

Giaralis, A. and Petrini, F. (2017). Optimum design of the tuned mass-damper-inerter for serviceability limit state performance in wind-excited tall buildings. Procedia Engineering, 199, pp. 1773-1778. doi: 10.1016/j.proeng.2017.09.453

Marian, L. and Giaralis, A. (2017). The tuned mass-damper-inerter for harmonic vibrations suppression, attached mass reduction, and energy harvesting. Smart structures and systems, 19(6), pp. 665-678. doi: 10.12989/sss.2017.19.6.665

Yin, D., Wang, D., Li, W., Li, X., Zhang, H. and Naher, S. (2017). Development of a new 3D model for the prediction of residual stress and fracture behaviour in Ti-6Al-4V after ultrasonic peening treatment. Journal of Materials Processing Technology, 247, pp. 29-39. doi: 10.1016/j.jmatprotec.2017.03.033

Salvi, J. and Giaralis, A. (2016). Concept study of a novel energy harvesting-enabled tuned mass-damper-inerter (EH-TMDI) device for vibration control of harmonically-excited structures. Journal of Physics: Conference Series, 744(1), 012082-.. doi: 10.1088/1742-6596/744/1/012082

Gkoktsi, K. and Giaralis, A. ORCID: 0000-0002-2952-1171 (2016). Assessment of sub-Nyquist deterministic and random data sampling techniques for operational modal analysis. In: 8th European Workshop on Structural Health Monitoring (EWSHM 2016). (pp. 1684-1693). NDT. ISBN 9781510827936

Petrini, F. and Giaralis, A. ORCID: 0000-0002-2952-1171 (2016). Control of across-wind vortex shedding induced vibrations in tall buildings using the tuned mass-damper-inerter (TMDI). Paper presented at the 6th European Conference on Structural Control - EACS2016, 11-13 Jul 2016, Sheffield, England.

Giaralis, A. ORCID: 0000-0002-2952-1171 and Taflanidis, A. A. (2016). Robust reliability-based design of seismically excited tuned mass-damper-inerter (TMDI) equipped MDOF structures with uncertain properties. Paper presented at the 6th European Conference on Structural Control - EACS2016, 11-13 Jul 2016, Sheffield, England.

Gkoktsi, K., Giaralis, A. and TauSiesakul, B. (2016). Sub-Nyquist signal-reconstruction-free operational modal analysis and damage detection in the presence of noise. Paper presented at the SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 20-24 Mar 2016, Las Vegas, USA.

Giaralis, A. ORCID: 0000-0002-2952-1171 and Marian, L. (2016). Use of inerter devices for weight reduction of tuned mass-dampers for seismic protection of multi-storey buildings: the tuned mass-damper-interter (TMDI). Proceedings Volume 9799, Active and Passive Smart Structures and Integrated Systems 2016, 9799, doi: 10.1117/12.2219324

Liu, J., Khan, U., Coleman, J., Fernandez, B., Rodriguez, P., Naher, S. and Brabazon, B. (2016). Graphene Oxide and Graphene Nanosheet Reinforced Aluminium Matrix Composites: powder synthesis and prepared composite characteristics. Materials & Design, 94, pp. 87-94. doi: 10.1016/j.matdes.2016.01.031

Kabir, I. R., Yin, D. and Naher, S. (2016). Two dimensional finite element thermal model of laser surface glazing for H13 tool steel. AIP Conference Proceedings, 1769(1), p. 110003. doi: 10.1063/1.4963512

Ponnusami, S. A., Turteltaub, S. and van der Zwaag, S. (2015). Cohesive-zone modelling of crack nucleation and propagation in particulate composites. Engineering Fracture Mechanics, 149, pp. 170-190. doi: 10.1016/j.engfracmech.2015.09.050

Giaralis, A. ORCID: 0000-0002-2952-1171 and Kougioumtzoglou, I. A. (2015). A stochastic dynamics approach for response spectrum analysis of bilinear systems using time-dependent equivalent linear properties. In: Proceedings of the 12th International Conference on Applications of Statistics and Probability in Civil Engineering (ICASP12). . Vancouver: University of British Columbia Library. ISBN 9780888652454

Giaralis, A. ORCID: 0000-0002-2952-1171 and Taflanidis, A. A. (2015). Reliability-based design of tuned mass-damper-inerter (TMDI) equipped multi-storey frame buildings under seismic excitation. In: Proceedings of the 12th International Conference on Applications of Statistics and Probability in Civil Engineering (ICASP12). . Vancouver: University of British Columbia Library. ISBN 9780888652454

Chatzi, E. N., Giaralis, A. ORCID: 0000-0002-2952-1171 and Kougioumtzoglou, I. A. (2015). Foreword - Special Issue on Data Acquisition and Processing, Uncertainty Management and Inverse Problem Techniques for Structural Health Monitoring Applications. International Journal of Sustainable Materials and Structural Systems, 2(1/2), pp. 1-2.

Siesakul, B. T., Gkoktsi, K. and Giaralis, A. (2015). Compressive power spectrum sensing for vibration-based output-only system identification of structural systems in the presence of noise. Compressive Sensing IV, 9484, 94840K. doi: 10.1117/12.2177162

Gkoktsi, K. and Giaralis, A. (2015). Effect of frequency domain attributes of wavelet analysis filter banks for structural damage localization using the relative wavelet entropy index. International Journal of Sustainable Materials and Structural Systems, 2(1-2), pp. 134-160. doi: 10.1504/IJSMSS.2015.078365

Gkoktsi, K., TauSiesakul, B. and Giaralis, A. (2015). Multi-channel sub-Nyquist cross-Spectral Estimation for Modal Analysis of Vibrating Structures. In: UNSPECIFIED . IEEE. ISBN 978-1-4673-8352-3

Laksmi, B., Nouri, J. M., Brabazon, D. and Naher, S. (2015). Prediction of properties for the production and application of graphene reinforced metal matrix composites. Paper presented at the 8th International Conference on Sustainable Energy & Environmental Protection (SEEP 2015), 11-14 August 2015, University of the West of Scotland, Paisley.

Marian, L. and Giaralis, A. (2014). Optimal design of a novel tuned mass-damper-inerter (TMDI) passive vibration control configuration for stochastically support-excited structural systems. Probabilistic Engineering Mechanics, 38, pp. 156-164. doi: 10.1016/j.probengmech.2014.03.007

Blonde, R., Jimenez-Melero, E., Ponnusami, S. A., Zhao, L., Schell, N., Bruck, E., van der Zwaag, S. and van Dijk, N. (2014). Position-dependent shear-induced austenite-martensite transformation in double-notched TRIP and dual-phase steel samples. Journal Of Applied Crystallography, 47, pp. 956-964. doi: 10.1107/S1600576714006712

Ahmad, A.H., Naher, S. and Brabazon, D. (2014). Injection tests and effect on microstructure and properties of aluminium 7075 direct thermal method feedstock billets. Key Engineering Materials, 611, pp. 1637-1644. doi: 10.4028/www.scientific.net/KEM.611-612.1637

Naher, S., Ahmad, A.H. and Brabazon, D. (2014). Direct thermal method of aluminium 7075. Advanced Materials Research, 939, pp. 400-408. doi: 10.4028/www.scientific.net/AMR.939.400

Ahmad, A.H., Naher, S. and Brabazon, D. (2014). The effect of direct thermal method, temperature and time on microstructure of a cast aluminum alloy. Materials and Manufacturing Processes, 29(2), pp. 134-139. doi: 10.1080/10426914.2013.822980

Lipowiecki, M., Ryvolova, M., Toettoesi, A., Kolmer, N., Naher, S., Brennan, S.A., Vazquez, M. and Brabazon, D. (2014). Permeability of rapid prototyped artificial bone scaffold structures. Journal of Biomedical Materials Research Part A, 102(11), pp. 4127-4135. doi: 10.1002/jbm.a.35084

Skrekas, P., Sextos, A. and Giaralis, A. (2014). Influence of bi-directional seismic pounding on the inelastic demand distribution of three adjacent multi-storey R/C buildings. Earthquakes and Structures, 6(1), pp. 71-87. doi: 10.12989/eas.2014.6.1.071

Gkoktsi, K. and Giaralis, A. (2014). On the influence of frequency selectivity of wavelet bases for relative wavelet entropy-based structural damage localization. Paper presented at the 6th World Conference on Structural Control and Monitoring, 15-07-2014 - 17-07-2014, Barcelona, Spain.

TauSiesakul, B., Gkoktsi, K. and Giaralis, A. (2014). Compressive sensing spectral estimation for output-only structural system identification. Paper presented at the 7th Stochastic Computational Mechanics Conference, 15-18 June 2014, Santorini, Greece.

Marian, L. and Giaralis, A. ORCID: 0000-0002-2952-1171 (2013). Optimal design of inerter devices combined with TMDs for vibration control of buildings exposed to stochastic seismic excitation. In: Deodatis, G., Ellingwood, B. R. and Frangopol, D. M. (Eds.), Safety, Reliability, Risk and Life-Cycle Performance of Structures and Infrastructures. (pp. 1025-1032). Boca Raton: CRC Press. ISBN 9781138000865

Spanos, P. D. and Giaralis, A. (2013). Third-order statistical linearization-based approach to derive equivalent linear properties of bilinear hysteretic systems for seismic response spectrum analysis. Structural Safety, 44, pp. 59-69. doi: 10.1016/j.strusafe.2012.12.001

Giaralis, A. and Spanos, P. D. (2013). Derivation of equivalent linear properties of Bouc-Wen hysteretic systems for seismic response spectrum analysis via statistical linearization. Paper presented at the 10th HSTAM International Congress on Mechanics, 25 - 27 May 2013, Chania, Greece.

Lungu, A. and Giaralis, A. (2013). A non-separable stochastic model for pulse-like ground motions. Paper presented at the 11th International Conference on Structural Safety and Reliability for Integrating Structural Analysis, Risk and Reliability, 16 - 20 June 2013, New York, USA.

Skrekas, P. and Giaralis, A. (2013). Influence of near-fault effects and of incident angle of earthquake waves on the seismic inelastic demands of a typical Jack-Up platform. Paper presented at the 14th International Conference: The Jack-Up Platform Design, Construction & Operation, 17 - 18 September 2013, London.

Aqida, S.N., Brabazon, D. and Naher, S. (2012). Atomic diffusion in laser surface modified AISI H13 steel. Applied Physics A: Materials Science & Processing, 112(1), pp. 139-142. doi: 10.1007/s00339-012-7214-x

Aqida, S.N, Brabazon, D. and Naher, S. (2012). An investigation of phase transformation and crystallinity in laser surface modified H13 steel. Applied Physics A: Materials Science & Processing, 110(3), pp. 673-678. doi: 10.1007/s00339-012-7149-2

Giaralis, A. ORCID: 0000-0002-2952-1171 and Lungu, A. (2012). Assessment of wavelet-based representation techniques for the characterization of stochastic processes modelling pulse-like strong ground motions. Paper presented at the 6th International ASRANet Conference, 02 - 04 July 2012, Croydon, London, UK.

Chikarakara, E., Naher, S. and Brabazon, D. (2012). High speed laser surface modification of Ti-6Al-4V. Surface and Coatings Technology, 206(14), pp. 3223-3229. doi: 10.1016/j.surfcoat.2012.01.010

Giaralis, A. and Spanos, P. D. (2012). Derivation of response spectrum compatible non-stationary stochastic processes relying on Monte Carlo-based peak factor estimation. Earthquakes and Structures, 3(3), pp. 581-609.

Giaralis, A., Kougioumtzoglou, I. and Spanos, P. D. (2011). A stochastic approach for deriving effective linear properties of bilinear hysteretic systems subject to design spectrum compatible strong ground motions. Paper presented at the 8th International Conference on Structural Dynamics (EURODYN 2011), 04-06 July 2011, Leuven, Belgium.

Giaralis, A. and Spanos, P. D. (2011). Determination of non-stationary stochastic processes compatible with seismic response/design spectra. Paper presented at the 6th International Conference on Computational Stochastic Mechanics (CSM-6), 13th - 16th June 2010, Rhodes, Greece.

Tsavdaridis, K. D. and Giaralis, A. (2011). Derivation of dynamic properties of steel perforated Ultra Shallow Floor Beams (USFBTD) via Finite Element modal analysis and experimental verification. Paper presented at the 7th National Conference on Steel Structures, 28th - 30th September 2011, Volos, Greece.

Naher, S., Orpen, D., Brabazon, D., Poulsen, C.R. and Morshed, M.M. (2010). Effect of micro-channel geometry on fluid flow and mixing. Simulation Modelling Practice and Theory, 19(4), pp. 1088-1095. doi: 10.1016/j.simpat.2010.12.008

Aqida, S.N., Calosso, F., Brabazon, D., Naher, S. and Rosso, M. (2010). Thermal fatigue properties of laser treated steels. International Journal of Material Forming, 3(S1), pp. 797-800. doi: 10.1007/s12289-010-0890-1

Giaralis, A. and Spanos, P. D. (2010). Derivation of Eurocode 8 spectrum-compatible time-histories from recorded seismic accelerograms via harmonic wavelets. Paper presented at the 9th HSTAM International Congress on Mechanics (9HSTAM), 12th - 14th July 2010, Limassol, Cyprus.

Giaralis, A. and Spanos, P. D. (2010). Effective linear damping and stiffness coefficients of nonlinear systems for design spectrum based analysis. Soil Dynamics and Earthquake Engineering, 30(9), pp. 798-810. doi: 10.1016/j.soildyn.2010.01.012

Giaralis, A. and Spanos, P. D. (2009). Determination of design spectrum compatible evolutionary spectra via Monte Carlo peak factor estimation. Paper presented at the 7th International Probabilistic Workshop (7th IPW), 25th - 26th November 2009, Delft, The Netherlands.

Giaralis, A. and Spanos, P. D. (2009). Wavelet-based response spectrum compatible synthesis of accelerograms-Eurocode application (EC8). Soil Dynamics and Earthquake Engineering, 29(1), pp. 219-235. doi: 10.1016/j.soildyn.2007.12.002

Spanos, P. D., Giaralis, A. and Li, J. (2009). Synthesis of accelerograms compatible with the Chinese GB 50011-2001 design spectrum via harmonic wavelets: artificial and historic records. Earthquake engineering and engineering vibration, 8(2), pp. 189-206. doi: 10.1007/s11803-009-9017-4

Spanos, P. D. and Giaralis, A. (2008). Statistical linearization based estimation of the peak response of nonlinear systems subject to the EC8 design spectrum. 2008 SEISMIC ENGINEERING CONFERENCE COMMEMORATING THE 1908 MESSINA AND REGGIO CALABRIA EARTHQUAKE, PARTS 1 AND 2, 1020, pp. 1236-1244. ISSN 0094-243X

Giaralis, A. and Spanos, P. D. (2007). A stochastic approach to synthesizing response spectrum compatible seismic accelerograms. Paper presented at the 4th International Conference on Earthquake Geotechnical Engineering (4ICEGE), 25-28 June 2007, Thessaloniki, Greece.

Spanos, P. D., Giaralis, A. and Politis, N. P. (2007). Algorithmic options for joint time-frequency analysis in structural dynamics applications. Paper presented at the 8th HSTAM International Congress on Mechanics, 12th - 14th July 2007, Patras, Greece.

Spanos, P. D., Giaralis, A. and Politis, N. P. (2007). Time-frequency representation of earthquake accelerograms and inelastic structural response records using the adaptive chirplet decomposition and empirical mode decomposition. Soil Dynamics and Earthquake Engineering, 27(7), pp. 675-689. doi: 10.1016/j.soildyn.2006.11.007

Spanos, P. D., Giaralis, A., Politis, N. P. and Roesset, J. M. (2007). Numerical treatment of seismic accelerograms and of inelastic seismic structural responses using harmonic wavelets. Computer-aided civil and infrastructure design, 22(4), pp. 254-264. doi: 10.1111/j.1467-8667.2007.00483.x

Politis, N. P., Giaralis, A. and Spanos, P. D. (2006). Joint time-frequency representation of simulated earthquake accelerograms via the adaptive chirplet transform. Paper presented at the 5th International Conference on Computational Stochastic Mechanics (CSM-5), 21 - 23 June 2006, Rhodes, Greece.